How to cleaning or replace a noisy VW Polo 2003 9N heater blower motor.
Heather blower (HVAC) motor was making lout noise at speed 2, 3 and 4. While the blower motor was running the dashboard was vibrating because of it.
Video – VW Polo 2003 9N Heater Blower Motor Noise
Showing how to remove it from the car, ckeck and clean it. If the noise is still present you can replace the motor but i’s worth trying to clean it before doing that.
Also showing the thermal fuse of the blower motor. If this fuse is blown, your ventilation will work only on speed 4. On the other speeds the motor will be off.
That thermal fuse can be blown if the motor is really going bad and doesn’t sping freely, thus consuming more power(drawing more current). That fuse is a safety measure, replace it if needed with the same specification. DO NOT replace it with a plain wire!!
How to change or replace an Apple iPhone 5/5S battery. Showing the difficult parts and how to easily replace the iPhone battery yourself.
The old battery was dead and would not hold a charge anymore and was getting hot during charging. Battery life was very short(1-2h max.).
This is an easy fix/ repair that you can do yourself. It’s the first time I do this, if I could do it, you can do it too!
iPhone 5S battery replacement video
Original battery is Li-ion Polymer, 1560mAh 3.8v DC 5.92Whr 4.3V full charge APN: 616-0718 VPN: A69TA006H GB/T 18287-2000 Made by Simplo Technology(Changshu) Inc. Made in Thailand Manufacture date 08/2013
This fix is easy to DIY at home do but you need to have steady hands to repair your iPhone. If in doubt, do not do this yourself and take it to your nearest repair shop to do it for you.
This DIY howto video shows you how to change or replace the battery in your Apple iPhone 5S smartphone. This works for iPhone 5C too. Showing a macro / close-up view of the important moments when changing the iPhone battery.
I have changed the battery before on my iPhone, that’s why it’s more easy to change it now. Reusing the original battery glue strips means that it’s easier to remove the battery when you change it again later.
The old battery was starting to get weaker at about 70% of it’s original capacity and I’ve decided not to wait until the battery lasts 2 hours again like before.
Also wanted to show you a better view of the important moments with macro video. 🙂
If this is the first time the battery is changes on you iPhone or new glue strips were installed before, you can pull the tab with the glue string (shown in video) to remove them or use the alternative method and not that it will be more difficult than it’s shown here. The original glue strips can be softened if you heat the back of the phone with a hair dryer or heat-gun.
You can do this easy fix or repair yourself. It’s the second time I do this, if I could do it, you can do it too!
Made a second video with detailed instructions about how to do this battery change: