Maxtor / Seagate D3 Station – 4TB External HDD Unboxing and Test This external hard disk (HDD) comes with a large variation of power adapters.
In the box:
USB 3.0 data cable
Power supply and socket adapters
Manual, warranty, blah blah…
For the drive to spin-up you must connect power and the data cable. If only power is connected, it will stay in sleep mode.
During a transfer speed test the drive just stopped working and an error message popped up about the drive being gone. Checked the windows event log and that confirmed, the drive dissapeared on it’s own and the event log had errors related to the HDD.
After a bit of troubleshooting I’ve realized that the USB 3.0 extension I was using was ‘not good enough’. Connect the HDD directly to the USB port in the computer, no cheapo USB extensions and you’ll be alright. 🙂
How to change or replace an Apple iPhone 5/5S battery. Showing the difficult parts and how to easily replace the iPhone battery yourself.
The old battery was dead and would not hold a charge anymore and was getting hot during charging. Battery life was very short(1-2h max.).
This is an easy fix/ repair that you can do yourself. It’s the first time I do this, if I could do it, you can do it too!
iPhone 5S battery replacement video
Original battery is Li-ion Polymer, 1560mAh 3.8v DC 5.92Whr 4.3V full charge APN: 616-0718 VPN: A69TA006H GB/T 18287-2000 Made by Simplo Technology(Changshu) Inc. Made in Thailand Manufacture date 08/2013
This fix is easy to DIY at home do but you need to have steady hands to repair your iPhone. If in doubt, do not do this yourself and take it to your nearest repair shop to do it for you.
This DIY howto video shows you how to change or replace the battery in your Apple iPhone 5S smartphone. This works for iPhone 5C too. Showing a macro / close-up view of the important moments when changing the iPhone battery.
I have changed the battery before on my iPhone, that’s why it’s more easy to change it now. Reusing the original battery glue strips means that it’s easier to remove the battery when you change it again later.
The old battery was starting to get weaker at about 70% of it’s original capacity and I’ve decided not to wait until the battery lasts 2 hours again like before.
Also wanted to show you a better view of the important moments with macro video. 🙂
If this is the first time the battery is changes on you iPhone or new glue strips were installed before, you can pull the tab with the glue string (shown in video) to remove them or use the alternative method and not that it will be more difficult than it’s shown here. The original glue strips can be softened if you heat the back of the phone with a hair dryer or heat-gun.
You can do this easy fix or repair yourself. It’s the second time I do this, if I could do it, you can do it too!
Made a second video with detailed instructions about how to do this battery change: